First Look: 2015 Yeti SB5c with Switch Infinity Technology 7

There are hundreds of 5-inch travel trail bikes on the market, but none work like Yetiโ€™s all-new 2015 SB5c. At the heart of the frame rests a new suspension technology called โ€œSwitch Infinity,โ€ which builds off their years of experience working with linear rail systems. Paired with a 140mm fork this trail bike sports some aggressive numbers and a capable attitude.

When developing the SB5c, Yeti says they wanted to achieve a firm pedaling platform without giving up small bump compliance, as well as a firm mid-stroke without giving up mid-stroke compliance. To be honest it all sounds like the same marketing terms thrown at the majority of bikes these days, some seemingly contradictory, but the proof would be had on the trail. How does it ride? How does it work? What makes it special? We headed to Yetiโ€™s Golden, Colorado headquarters to find out.

SB5c Highlights

  • Full carbon frame
  • 5-inches (127mm) of rear wheel travel
  • Switch Infinity suspension technology
  • 27.5-inch wheels
  • Tapered headtube
  • Molded downtube and chainstay protectors
  • Internal seatpost routing
  • Removable ISCG05 mount
  • Front derailleur direct mount with optional cover
  • Press Fit bottom bracket
  • 12x142mm rear axle
  • Post mount disc brake tabs
  • Available in XS, S, M, L, and XL sizes
  • 5.1-pound frame weight (Size Medium)
  • Black and turquoise color options

Switch Infinity

It may seem odd that just three years after the debut of the eccentric Switch Technology system Yeti is changing gears, and it begged us to question why. While the previous Switch system worked quite well, especially on the often praised SB66, the system would at times fight itself - a shortcoming only a few riders picked up on beyond Yetiโ€™s hard charging employees and Pro racers. During successive hits, as the eccentric link tried to switch directions, it would sometimes stiffen up. Yeti knew they could do better, and it turns out theyโ€™ve been quietly working on the new Switch Infinity system since before the original Switch design came to market.

Old vs new - the original Switch system and Switch Infinity.

The key to Yetiโ€™s Switch concept is that by changing the direction of the main pivotโ€™s movement, theyโ€™re able to achieve certain antisquat characteristics and meet leverage ratio needs as the bike goes through its travel. At the beginning of the travel, the main pivot would previously rotate such that the wheel path was rearward, providing anti-squat. Now the Switch Infinity system moves upward. Once the Switch system reaches the inflection point, it reverses directions, preventing the chain force from adversely affecting the suspension performance and giving the suspension a controlled, bottomless feel.

While the concept is similar on both systems, how the switch is executed is the big difference. Previously the Switch system was essentially a very short link that changed directions quickly. This short link was less stable and harder to control kinematically, not to mention the tight tolerances required for it to work correctly. Because the new Switch Infinity system moves in a linear fashion, itโ€™s far easier to tune the suspension behavior. Itโ€™s called Switch Infinity because you'd need a link of infinite length to duplicate the perfectly linear movement using a traditional design.

Chain forces are now perpendicular to the Switch Infinity system, allowing it to react to the terrain independent of pedaling inputs. Yeti says the movement of the system is also much more โ€œfree,โ€ eliminating one of the drawbacks of the eccentric Switch Link. Because itโ€™s easier to control, itโ€™s easier to get what they want from the suspension depending on the bikeโ€™s intended use. Theyโ€™re able to pretty much adjust bikeโ€™s antisquat and leverage ratio independently. Shock tuning is also easier thanks to a linear-shaped leverage curve, and the SB5c sees a little more progressivity built into the system than their previous SB line of bikes. All said and done, Yeti says the end result is better pedaling efficiency and small bump sensitivity when climbing, paired with plush, controlled travel when descending.

Chris Conroy, President of Yeti Cycles, holds up one of the first Switch Infinity prototypes. Over 500 hours of ride time have been put on a similar prototype frame.

Partnering with FOX

Those familiar with the Yeti 303 downhill bike will know that it also uses a linear rail system, albeit with a different design goal. So why not use a similar system? Weight and durability. While the linear rail car on the 303 helped prove part of their concept, itโ€™s heavy on the scale and the maintenance schedule, even though things have improved in recent revisions.

By partnering with FOX, Yeti was able to bring FOXโ€™s knowledge and expertise in off-road and mountain bike applications into the picture. The resulting Switch Infinity assembly uses FOX off-road bushings and seals, as well as a pair of Kashima coated stanchions. It saves 100 grams over the old Switch Link. Durability wise, it has been tested using various methods, including a demanding one million cycle dirt-slurry immersion test that's also performed on FOXโ€™s forks. In the real world theyโ€™ve put three years of use on a single test mule and are confident in the systemโ€™s longevity. To protect it from wheel debris and to stiffen the rear end, the sleek carbon frame wraps both in front of and behind the system.

SB5c Geometry

Yeti is well known for their long, low geometry, and the SB5c follows suit. The 67-degree head angle, 13.4-inch (340mm) bb height, and 17.4-inch (442mm) chainstay length combine to create a bike thatโ€™s capable and fun to ride. Add in a 72.5-degree seat angle and youโ€™re in a good position to pedal.

Initial Impressions

Situated in Golden, Colorado, Yetiโ€™s proving grounds are right across the street. Everyday from 11:30-1:00 youโ€™re unlikely to find a single employee at their desk. Instead, theyโ€™re out putting in the miles. We had the opportunity to join them for a lunch ride aboard the SB5c.

Apex Trail is one of the rowdier options along the foothills of the Front Range of Colorado. Itโ€™s very rocky, and often times super dusty and sandy. Youโ€™ll also find some of the only roots in the area spaced perfectly to keep you on your toes. Finding traction isnโ€™t always easy, especially on the steep, techy climbs.

We would have taken some trail photos but we were having too much fun. Instead you get another drool worthy product shot.

Pedaling up several pitches to get to the top we couldnโ€™t help but be impressed. We never bothered to put the rear shock in Trail or Climb mode - there simply wasnโ€™t a need. The bike pedals incredibly well, both on smooth and techy portions of trail, and the traction made available by the active rear end was all we could hope for, which is a lot considering the relatively tame 2.2-inch Maxxis Ikon tire on the back. The bike strikes a great balance between efficiency and shock absorption. Notably, itโ€™s a very quiet ride when leaping up and over obstacles, never pitching your weight around or making already hard moves harder like many other bikes do.

Once pointed downhill we were balls to the wall trying to keep up with Yetiโ€™s own Dave Zeigman, a former DH Pro with a penchant for taking wild lines, all the while digging into our memory bank to recall the trailโ€™s big hits and trouble spots. Itโ€™s no secret that todayโ€™s trail bikes are very good, and many of them are capable of being ridden much like a downhill bike. What surprised us was that we were able to do just that on our first ride out, recklessly abandoning any sense of safety literally just a few turns into the descent. The bikeโ€™s front to back balance is superb, making it feel very natural from the get go, and it rides like a well-tuned bike with an inch of travel more.

Hucking into the high speed gnar of the Enchanted Forest section of trail the bike continued to impress. It has a quiet nature to it, seemingly calming down the trail and letting you look further ahead. Changing lines at a momentโ€™s notice was easy to do, as was picking up the front end for manuals or to jump. There was no harsh kickback at any time, even through the rocky bits. Pumping the terrain yielded good bursts of speed, as did pushing into turns or mashing on the pedals while standing or seated.

Yeti and FOX also nailed the shock tune, which provides a very supple ride with great damping and a smooth ramp towards the end of the stroke. We used full travel a few times, but the bottom was never very noticeable.

The only thing we'd change about the stock build are the stem and bars, opting for something in the 50mm range and with a bit more width. We might throw some meatier tires on too.

Are we gushing? Damn straight we are. The SB5c is that rad. Weโ€™d rate it among our top five 5-inch trail bikes, and weโ€™ve pretty much ridden them all.

Itโ€™s awesome to see some new innovation in the suspension world. As you might have guessed, the introduction of this platform is the start of a story. Keep an eye out for additional Switch Infinity bikes suited to more types of riding in the near future.

SB5c Models and Pricing

The SB5c is available today as a complete bike with SRAMโ€™s X01 build kit, or with an Enve M60 wheelset as an upgrade. It will also be available with a SRAM XX1 build kit with an Enve M60 wheelset. Sorry aluminum lovers, the SB5 will come with a carbon frame only.

UPDATE:

The Yeti SB5c earned the Vital Shreddy Award for Bike of the Year!

Buy the Yeti SB5c at Jenson USA.

7 comments

View replies to: First Look: 2015 Yeti SB5c with Switch Infinity Technology

Comments

The Latest