Accessibility Widget: On | Off

Yeti ASR-SLC 5

Create New Tag
Frame: Yeti ASR-SLC. Misc.: Medium (aluminum front triangle / carbon fiber rear triangle)
Rear Shock: Fox Racing Shox Float RP23. Misc.: PUSH'ed
Fork: Rock Shox SID Team. Misc.: PUSH'ed / ACS 3
Headset: Chris King NoThreadset
Handlebar: Race Face Chester. Misc.: 780mm
Stem: Truvativ Hussefelt Stem. Misc.: 50mm +/-7 degree
Grips: ODI Lock-On Grips/Clamps - Yeti. Misc.: Double locks with Yeti logo
Brakes: Shimano XT M8000. Misc.: Ice - Tech pads; Avid rotors- 203mm front/203mm rear
Brake Levers: Shimano XT M8000
Shifters: Shimano XTR SL-M980
Front Derailleur: Shimano XTR Race M986 Front Derailleur
Rear Derailleur: Shimano XTR RD-M986 Shadow Plus
Chainguide: Race Face Bash Guard 36t
Cranks: Race Face Turbine Basic 2X10 Crankset 24mm
Chainrings / Sprocket: Race Face 36T / 22T
Bottom Bracket: Shimano SAINT 24mm
Chain: Shimano XT M8000
Cassette / Rear Cog: Shimano XT M771 11-36
Pedals: Crankbrothers Eggbeater
Front Rim: Easton EA70 XC. Misc.: 24 hole
Rear Rim: Easton EA70 XC. Misc.: 24 hole
Hubs: Easton 6 bolt discs. Misc.: 24 spoke front and rear
Spokes: Wheelsmith Butted 2.0/1.7 Spokes. Misc.: Alloy nipples
Front Tire: Schwalbe Nobby Nic Performance 2.35. Misc.: Setup tubeless with Stan's Race Sealant and Muc-Off 44mm valve stems
Rear Tire: Continental X-King 2.4 Protection. Misc.: Setup tubeless with Stan's Race Sealant and Muc-Off 44mm valve stems
Saddle: Selle Italia SLR Ti SuperFlo. Misc.: Perforated
Seatpost: Other Promax SG-1
Seatpost Clamp: Other YETI
General Info
Model Year: 2007
Riding Type: Trail / All-Mountain
Weight: 0 lb 0 oz (0 g)
Additional Info: Jagwire Mountain Pro shift cable set; Slicy mudguard -custom; Niterider Cyclops Premium lighting system; Race Face Strap /stash pouch; Axiom Fuseair 120A pump and co2; Muc-Off tubeless valve stem kit; Stan's Race Sealant; Gorilla Tape To-Go

Vital MTB member richierich66 richierich66 10/17/2019 12:35 PM

  • Next Bike Check
  • 1653 of 13151

5 comments newest first

I started running boots on my forks way back in '89 on original Rock Shox RS1s and just always have ran them on every suspension fork I've used since. They actually do keep alot of stuff off the stanchions and seals. I could see where it could be argued that they also trap contaminants but the way these Lizard Skins fit so tightly and seal so well there little opportunity for contaminants to get in there. I also remove them after each ride and wash mine out. Besides, I just like the way they look! ๐Ÿ˜œ

| Reply
Show More Comment(s)

More Bike Checks