Pump1_rev1c Custom 26" Pump bike

6214 of 16868
Parts
Brand
Model
Additional info

Parts

Frame
Other
Pump_rev1c
Custom
Frame: Other Pump_rev1c. Misc: Custom
Fork
DT Swiss
XMM 120 Single Shot Fork
Fork: DT Swiss XMM 120 Single Shot Fork
Headset
Other
Scrap Bin
Headset: Other Scrap Bin
Handlebar
Easton
Handlebar: Easton
Stem
Race Face
Evolve XC Stem
Stem: Race Face Evolve XC Stem
Grips
Oury
Grips: Oury
Brakes
Shimano
XT
Brakes: Shimano XT
Cranks
Race Face
Cranks: Race Face
Bottom Bracket
Race Face
Bottom Bracket: Race Face
Chain
KMC
Chain: KMC
Cassette / Rear Cog
Other
Cassette / Rear Cog: Other
Front Rim
DT Swiss
Front Rim: DT Swiss
Rear Rim
DT Swiss
Rear Rim: DT Swiss
Hubs
DT Swiss
Hubs: DT Swiss
Spokes
DT Swiss
Spokes: DT Swiss
Front Tire
Kenda
Slant Six
26"
Front Tire: Kenda Slant Six. Misc: 26"
Rear Tire
Kenda
Slant Six
26"
Rear Tire: Kenda Slant Six. Misc: 26"
Saddle
Cannondale
Ex Girlfriends
shhh!
Saddle: Cannondale Ex Girlfriends. Misc: shhh!
Seatpost
Other
Scrap Bin
Seatpost: Other Scrap Bin
Seatpost Clamp
Other
Weld Nuts and 4130 Steel
Seatpost Clamp: Other Weld Nuts and 4130 Steel
General Info

General Info

Model Year
2019
Model Year:
2019
Riding Type
Dirt Jump/Urban
Riding Type:
Dirt Jump/Urban
Weight
23 lb 10 oz (10716 g)
Weight: 23 lb 10 oz (10716 g)
Additional Info

Been wanting to build my own frame for a long time. This was done over the month of March, after business hours in my work shop. I did a very basic jig build concurrently with this as well. Most of the geo is based off of a Santa Cruz long Jackal, but modified for a 120mm fork. I cleaned out my scrap bin to do the assembly, and this being my first frame, I was not going to bother with new parts. 4130 steel, Paragon sliding drops. 69° head angle, 418mm reach, 560mm stack. Chainstay length about 400mm. BikeCAD for the design work. Frame weight came in at 1860 grams.

Additional Info:

Been wanting to build my own frame for a long time. This was done over the month of March, after business hours in my work shop. I did a very basic jig build concurrently with this as well. Most of the geo is based off of a Santa Cruz long Jackal, but modified for a 120mm fork. I cleaned out my scrap bin to do the assembly, and this being my first frame, I was not going to bother with new parts. 4130 steel, Paragon sliding drops. 69° head angle, 418mm reach, 560mm stack. Chainstay length about 400mm. BikeCAD for the design work. Frame weight came in at 1860 grams.

6214 of 16868
0 comments

More Bike Checks

The Latest