Accessibility Widget: On | Off

2017 RM Slayer 790 MSL Dream build 10

Parts
Frame: Rocky Mountain Slayer 790 MSL. Misc.: L
Rear Shock: FOX Float X2 Factory
Fork: Rock Shox Lyrik RCT3 170
Headset: Cane Creek 110 series
Handlebar: ENVE DH Carbon. Misc.: 800mm
Stem: Renthal Apex 31mm
Grips: Ergon Ga2
Brakes: SRAM Guide RSC
Brake Levers: SRAM Guide RSC
Shifters: SRAM XX1 Eagle Gold
Rear Derailleur: SRAM XX1 Eagle Gold
Chainguide: e*thirteen
Cranks: Race Face SixC Carbon 165mm
Chainrings / Sprocket: OneUp Components Switch 34t
Bottom Bracket: Race Face
Chain: SRAM XX1 Eagle Gold
Cassette / Rear Cog: SRAM XX1 Eagle Gold
Pedals: OneUp Components composite
Front Rim: ENVE M70 thirty
Rear Rim: ENVE M70 thirty
Hubs: Onyx MTB Boost ISO
Spokes: Sapim CX-Ray
Front Tire: Maxxis Minnion DHF 2.3
Rear Tire: Maxxis Minnion DHR II 2.3
Saddle: Chromag Trailmaster LTD. Misc.: Ti
Seatpost: RockShox Reverb 1X Remote. Misc.: 170mm
General Info
Model Year: 2017
Riding Type: Freeride
Weight: 28 lb 8 oz (12927 g)

Vital MTB member Schaefdog Schaefdog 10/10/2017 11:59 AM

  • Next Bike Check
  • 4301 of 13006

10 comments newest first

This is my second month on the bike. I keep everything pretty clean, and used loctite 680 when I assembled the bb. No creaks as of yet. I rode in the pnw, so I expect I will get a creak, but it's pretty easy to disassemble and clean, at that time I'll probably replace the bb as they only go 6 months around here.

| Reply

FYI, my Giant Reign (ALU 1) from 2015 is still going strong in the BB department, original bearings after 2 seasons (bought it in july 2015), _NO_ creaking. I did have to replace the suspension bearings for example. The BB bearings are still smooth for some reason.

| Reply

Saw one on my vacation in the mountains, at the bike shop there, probably one of my favourite modern bikes visually.

| Reply
Show More Comment(s)

More Bike Checks